Pro 2 Breast Pump | All Flanges

1. Ensure the motor is fully charged using the provided USB-C cable.
2. Press the silicone breast shield snugly against your breast, with your nipple centred and no air gaps.
3. Long press the power button to begin pumping - the timer will start automatically.
4. Short press the M button to switch between modes.
5. Use the + and – buttons to adjust suction strength based on comfort and milk flow.

Tip: Keep the pump upright and avoid tilting during use to maintain optimal suction.

To get started, make sure all parts are clean and completely dry. Here’s the step-by-step assembly guide:

1. Insert the diaphragm into the top of the connector, ensuring it's sealed flat.
2. Push the duckbill valve firmly into the bottom of the connector.
3. Attach the connector to the milk collection cup, aligning the notches and pressing until secure.
4. Fit the silicone breast shield into the collection cup. Make sure it sits flush around the rim for a proper seal.
5. Place the motor on top and press down gently until it clicks into place.
6. A proper assembly ensures full suction and prevents leaks during pumping. Replace any worn or loose parts every 6–8 weeks.

A proper assembly ensures full suction and prevents leaks during pumping. Replace any worn or loose parts every 6–8 weeks.

Proper cleaning and sterilisation are essential to keep your Bubka Pro 2 safe, hygienic, and functioning at its best.

Before First Use

Sterilise all washable parts (excluding the motor) using one of the following methods:

• Boiling water: Submerge parts in boiling water for up to 5 minutes
• Steam steriliser or microwave steriliser: Follow manufacturer instructions
• This deep clean removes any manufacturing residue and preps your pump for safe use.
  
  After Each Pumping Session

Wash all parts that come into contact with milk in warm, soapy water

Use Bubka Eco Quick Clean Wipes to gently wipe down pump parts. These plant-based, biodegradable wipes are:

• Safe for food-contact surfaces
• Perfect for travel, work, or overnight pumping
• Designed specifically for breast pump parts and accessories
• Using the wipes between sessions can help reduce milk residue and bacteria build up until you're able to do a full clean.

Note: Avoid putting your pump parts in the dishwasher. High heat and harsh detergents can damage silicone components, causing them to degrade or lose shape prematurely.

1. Massage Mode: Light and fast suction to stimulate letdown.
2. Expression Mode: Strong, slower pulls to extract milk efficiently.
3. Lactation Mode: Mimics a baby’s natural feeding rhythm with varied pulls.
4. Auto Mode: Starts with Massage (5 pulls), then transitions to Expression (10 pulls)

Use the M button to toggle modes:

• Press once for Massage
• Press twice for Expression
• Press three times for Lactation
• Press four times for Auto

Tip: Higher suction does not always equal more milk. Find the strength that feels comfortable to avoid nipple pain or blocked ducts.

The Bubka Pro 2 works best with a snug-fitting bra that holds the pump securely in place against your breast. Avoid bras with underwire or heavy padding, as they can interfere with suction and comfort.

The key is to have enough compression to keep the pump stable without pressing too tightly on your breast.

The Bubka Pro 2 is designed specifically for modern mums looking for a wearable, discreet, and high-performing electric breast pump. It offers strong hospital-grade suction in a compact design that fits comfortably inside your bra - no cords required.

The Pro 2 is ideal for mums who want efficiency without compromising comfort or portability.

Check our Bubka Comparison Chart to see how the Bubka Pro 2 Breast Pump compares to the OG Breast Pump and Move Breast Pump.

Each Bubka Pro 2 Wearable Breast Pump comes with a generous set of spare parts and accessories to support long-term use and ensure you're always ready to pump - even if something goes missing or needs replacing.

Included in the box:

• Extra silicone duckbill valve (to support consistent suction)
• Spare silicone diaphragm (helps maintain pump pressure)
• Bra extenders for a better fit with various bra types
• USB charging cable
• Full flange kit ranging from 13mm to 24mm sizes for the perfect fit
• Flange nipple ruler to help you measure your nipple and choose the correct flange size
• Dust covers to protect the breast shield when not in use
  

If you require 13mm or 27mm flanges, these are available separately through our online store and can be added at checkout or purchased as spare parts later.

We’ve designed the Bubka Pro 2 to include what most mums actually need - so you can start pumping with confidence, straight out of the box.

• Sit upright or lean slightly forward
• Keep your body relaxed and your breast shield upright
• Avoid reclining or slouching, which can lead to milk pooling in the flange or reduced suction
• After pumping, lean slightly forward before removing the pump to help milk drain fully into the collection cup.

The Bubka Pro 2 designed for Aussie mums who need a powerful, quiet, and portable electric breast pump.

✅ Stronger suction than Bubka OG
✅ Up to 4 sessions per charge
✅ Compact and cordless - pump anywhere, anytime
✅ Whisper quiet under 45dB
✅ Trusted by thousands of Aussie mums